凯旋门注册

歡迎光臨濟南凯旋门注册數控科技有限公司官網為您提供:光纖激光切割機,木工加工中心,保麗龍加工中心

濟南光纖切割機,濟南木工加工中心,保麗龍加工中心
INFORMATION
業內資訊
聯系我們

0531-87229973

朱經理:15020002224
朱經理:15020002224
地址:山東濟南市長清區文昌街道辦事處郭莊南200米

業內資訊 當前位置:首頁 - 新聞中心 > 業內資訊 >

板式開料機提升工作效率的技巧都有什么?

來源:http://spetsnazbg.com 時間:2020-03-13 

一個好的過程設計實際上是下一個更好的過程設計的開始,過程設計本身就是一個在實踐中不斷探索和改進的過程,只是更好并不是更好。
A good process design is actually the beginning of the next better process design. Process design itself is a process of continuous exploration and improvement in practice, but better is not better.
1. 漸進主義原則
1. Principle of gradualism
一個好的過程設計實際上是下一個更好的過程設計的開始,過程設計本身就是一個在實踐中不斷探索和改進的過程,只是更好并不是更好。
A good process design is actually the beginning of the next better process design. Process design itself is a process of continuous exploration and improvement in practice, but better is not better.
2. 同步原理
2. Synchronization principle
也就是說,板式的部分的主要方向開瓶器產品作為一個單元,和小的方向是一個包裝單位的數量部分,為了控制部分實現包裝過程在同一時間或更短時間差異,為了避免在包裝相同的現象。它的核心內容實際上是進程表中時間項的乘積。各部件的工作時間應明確、準確、可操作,充分考慮綜合因素。
That is to say, the main direction of the plate part of the bottle opener product as a unit, and the small direction is the quantity part of a packaging unit, in order to control the difference of the part of the packaging process at the same time or the shortest time, in order to avoid the same phenomenon in the packaging. Its core content is actually the product of time items in the process table. The working time of each component shall be clear, accurate and operable, and comprehensive factors shall be fully considered.
濟南木工加工
3.質量方針
3. Quality policy
任何過程都不能以犧牲產品質量來提率,因為產品質量是產品的生命,以保證質量為前提,限度地實現量產。
No process can improve efficiency at the expense of product quality, because product quality is the life of the product, and mass production can be realized to the maximum extent on the premise of quality assurance.
4. 充分性原則
4. Principle of sufficiency
是板式開料機各工序避免浪費的工序本身,如:切削過程設備可以減少三個董事會同時,再次設計板兩塊,如鉆井過程孔位置在一張板應該已經完成了兩個可以,,你將會被設計成三個或四個完成,這些都使廢物過程本身影響加工效率,如果你想成為個點是對應的文件將全面是切削過程也有切圖,并準備訂單看到道路,有鉆孔工藝流程圖,并根據不同類型的鉆孔有不同的優化方案,同時,結合工作時間來進行。
It is the process itself of each process of the plate opening machine to avoid waste. For example, the cutting process equipment can reduce three boards of directors, and at the same time, two boards are designed again. For example, two boards should have been completed when the drilling process hole is located in one board, and you will be designed into three or four finishes, which will affect the processing efficiency of the waste process itself, If you want to be the first point, the corresponding document will be full of cutting process and cutting diagram, and prepare the order to see the road, have drilling process flow chart, and have different optimization schemes according to different types of drilling, at the same time, combined with working time.
var _hmt = _hmt || []; (function() { var hm = document.createElement("script"); hm.src = "https://hm.baidu.com/hm.js?78ebdacae9da971faf025645ab77d367"; var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(hm, s); })();