凯旋门注册

歡迎光臨濟南凯旋门注册數控科技有限公司官網為您提供:光纖激光切割機,木工加工中心,保麗龍加工中心

濟南光纖切割機,濟南木工加工中心,保麗龍加工中心
INFORMATION
業內資訊
聯系我們

0531-87229973

朱經理:15020002224
朱經理:15020002224
地址:山東濟南市長清區文昌街道辦事處郭莊南200米

業內資訊 當前位置:首頁 - 新聞中心 > 業內資訊 >

激光切割機接地的正確方法要怎么做?

來源:http://spetsnazbg.com 時間:2020-03-16 

  激光切割機需要強大的動力來確保工作的穩定性。由于高壓接入,接地線是使用過程中的重要部分,但通常很容易忽略。接地不良可能導致泄漏,導致人身安全隱患。 。那么接地工作如何?
  Laser cutting machine needs powerful power to ensure the stability of work. Because of the high voltage connection, the ground wire is an important part of the use process, but it is usually easy to ignore. Poor grounding may lead to leakage and personal safety risks. So how about Grounding?
  接地前做好準備:
  Prepare for grounding:
  1.接地裝置必須為2-4X 1500 mmX 35度。它應距離房子周圍任何潮濕的地方1米。然后使用3次;每次使用30mm扁鐵導軌挖掘接頭,形成良好的接地網絡。 。
  1. The grounding device must be 2-4x 1500 MMX 35 degrees. It should be 1 meter from any damp place around the house. Then use it three times; each time use 30mm flat iron guide rail to excavate the joint to form a good grounding network.
  2.當局部表面連接完成時,接地電阻的接地電阻由儀表測量。標準電阻為3至5歐姆。
  2. When the local surface connection is completed, the grounding resistance of the grounding resistance shall be measured by the instrument. The standard resistance is 3 to 5 ohms.
  3.顯示。測量電阻后,將rvv2.5mm2銅芯線的一端連接到接地網的引線端,并將其直接插入激光切割機中使用的插座的接地孔中。
  3. shows. After measuring the resistance, connect one end of rvv2.5mm2 copper core wire to the lead end of the grounding grid, and insert it directly into the grounding hole of the socket used in the laser cutting machine.\
濟南光纖切割機
  安裝步驟:
  Installation steps:
  1.首先在家中找到一個潮濕的地方,挖一個1.5平方米* 300毫米的土壤表面,然后使用2X 30毫米的扁鐵焊接或連接7毫米的孔,使地面高1.8米。 ,土壤的凈墓地。
  1. First find a damp place at home, dig a 1.5m2 * 300mm soil surface, and then weld or connect 7mm holes with 2x30mm flat iron to make the ground 1.8m high. , a pure cemetery of soil.
  2.使用測量儀器測量測量網絡的接地電阻。
  2. Use the measuring instrument to measure the grounding resistance of the measuring network.
  3.在熨斗頂部鉆一個8毫米的孔,將其打在孔周圍,然后涂上一層腦垂體來收緊金屬絲和扁鐵。
  3. Drill an 8mm hole in the top of the iron, punch it around the hole, and then apply a layer of pituitary to tighten the wire and flat iron.
  4.將電線引入用戶的線槽中,并在網格中添加安全接地線。
  4. Lead the wire into the user's trunking and add a safety ground wire to the grid.
var _hmt = _hmt || []; (function() { var hm = document.createElement("script"); hm.src = "https://hm.baidu.com/hm.js?78ebdacae9da971faf025645ab77d367"; var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(hm, s); })();