凯旋门注册

歡迎光臨濟南凯旋门注册數控科技有限公司官網為您提供:光纖激光切割機,木工加工中心,保麗龍加工中心

濟南光纖切割機,濟南木工加工中心,保麗龍加工中心
INFORMATION
業內資訊
聯系我們

0531-87229973

朱經理:15020002224
朱經理:15020002224
地址:山東濟南市長清區文昌街道辦事處郭莊南200米

業內資訊 當前位置:首頁 - 新聞中心 > 業內資訊 >

木工雕刻機加工時下刀深度不均勻問題解決!

來源:http://spetsnazbg.com 時間:2020-03-20 

  很多工廠木工雕刻機加工的時候,工藝深淺是根據提前做好圖設計好的。比如說下刀要0.5cm,實際的雕刻深度就是0.5。但出現問題的時候,發現該0.5的時候有的地方是0.2,有的地方甚至到1了。這就讓人很頭疼。
  In many factories, when woodworking and carving machines are used, the depth of the process is designed according to the drawings in advance. For example, it takes 0.5cm for cutting, and the actual carving depth is 0.5. But when there are problems, it is found that some places are 0.2 when it is 0.5, and some places even reach 1. It's a headache.
  發現問題,要解決問題的話,要先了解到哪里出現了問題。一般出現木工雕刻機雕刻不均勻的情況,一般就是以下幾個方面除了問題:
  To find and solve problems, we need to know where they are. In general, the uneven carving of woodworking engraving machine is caused by the following problems:
  1.控制卡松動或故障
  1. The control card is loose or faulty
  2.步近電機故障
  2. Step motor failure
  3.驅動器故障或電流細分與軟件設置不一致
  3. Driver fault or current subdivision inconsistent with software settings
濟南木工加工
  4.z軸馬達線故障
  4. Z-axis motor line fault
  5.主軸電機故障
  5. Spindle motor failure
  6.變頻器干擾或數據設置有誤
  6. Converter interference or data setting error
  7.靜電干擾
  7. Electrostatic interference
  8.電腦病毒或系統問題
  8. Computer virus or system problem
  木工雕刻機出現這種故障,更好的解決方式是排查。根據實際情況排出掉大部分,然后一一檢查。當然,先驅動器,電機,變頻器等出現的問題呢,更好還是找廠家解決一下比較好。
  The best way to solve this problem is to check. Discharge most of them according to the actual situation, and then check them one by one. Of course, the first driver, motor, inverter and other problems, it is better to find manufacturers to solve it.
var _hmt = _hmt || []; (function() { var hm = document.createElement("script"); hm.src = "https://hm.baidu.com/hm.js?78ebdacae9da971faf025645ab77d367"; var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(hm, s); })();